DIG DRIP IRRIGATION 1/2″ Blank Polyethylene Drip Tubing Black .620 ID X .710 OD – 100′

1″ Blank Polyethylene Drip Tubing Black .710 OD

DIG polyethylene drip tubing is design to meet all installation requirements for drip irrigation or low volume irrigation systems for commercial, agriculture, and residential applications. Our polyethylene drip tubing is available in 1/2” to 1” and in 50′, 100’, 200’, 500’, and 1000’ coils. Made of low-density polyethylene resin with a minimum of 2% carbon black, the polyethylene tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength.

 

Features

• Contains antioxidant to protect the drip tubing from thermal degradation, minimum of 2% concentrated carbon black resin added
• The polyethylene drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
• Contains the Dow FINGERPRINT™ (trace element) that certifies the product and provides verification as to the identity of the polyethylene tubing in the event of failure
• Use with our wide range of compression and barbed fittings
• Available in black or brown colors
• Coil length in 50′, 100, 250′, 500′ and 1000′ (15 m, 30 m, 75 m, 150 m, and 300 m)

Specifications

• Operating pressure: up to 60 PSI (4.2 BAR)
• Material: Dow FINGERPRINT™ premium grade, DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
• Available in six sizes:
  • .520 ID x .620 OD (13.2 mm x 15.7 mm) wall thickness: .050″ (1.3 mm)
  • .570 ID x .670 OD (14.5 mm x 17.0 mm) wall thickness: .050″ (1.3 mm)
  • .600 ID x .700 OD (15.2 mm x 17.8 mm) wall thickness: .050″ ( 1.3 mm)
  • .615 ID x .710 OD (15.6 mm x 18.0 mm) wall thickness: .0475″ (1.1 mm)
  • .820 ID x .940 OD (20.8 mm x 23.8 mm) wall thickness: .060″ (1.5 mm)
  • 1.060 ID x 1.200 OD (26.9 mm x 30.4 mm) wall thickness: .070″ (1.8 mm)